Black & Decker Bdas36v: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Black & Decker BDAS36V Information

the information about the Black & Decker BDAS36V cordless screwdriver:

Introduction

The Black & Decker BDAS36V is a compact and lightweight cordless screwdriver that is perfect for a variety of household and DIY tasks. It features a powerful 36-volt motor that delivers up to 5.5 Nm of torque, making it easy to drive even the toughest screws. The screwdriver also has a variable speed control and a reversing switch, so you can easily adjust the speed and direction of rotation to match the task at hand.

Image of Black & Decker BDAS36V cordless screwdriver

Specifications

  • Motor: 36 volts
  • Chuck: 1/4-inch
  • Speed: 0-550 RPM
  • Torque: 5.5 Nm
  • Battery: 2.0 Ah
  • Runtime: Up to 1 hour

Features

  • Powerful 36-volt motor
  • Variable speed control
  • Reversing switch
  • Keyless chuck
  • LED work light
  • Compact and lightweight design
  • Right-angle attachment
  • 20 accessories

What's in the box

  • Black & Decker BDAS36V cordless screwdriver
  • 2.0 Ah battery
  • Charger
  • Right-angle attachment
  • 20 accessories
  • Instruction manual

Additional Information

The Black & Decker BDAS36V is backed by a 2-year limited warranty. It is also available in a kit that includes a carrying case and additional accessories.

Here is a table that summarizes the key specifications of the Black & Decker BDAS36V:

FeatureSpecification
Motor36 volts
Chuck1/4-inch
Speed0-550 RPM
Torque5.5 Nm
Battery2.0 Ah
RuntimeUp to 1 hour
Weight1.2 pounds

I hope this information is helpful!

Black & Decker BDAS36V Compare with Similar Item

a table comparing the Black & Decker BDAS36V to some similar items:

FeatureBlack & Decker BDAS36VDewalt DCD791D2Makita XFD07ZMilwaukee 2767-20
Voltage36201818
Max torque175 ft-lbs145 ft-lbs140 ft-lbs145 ft-lbs
Chuck size1/2"1/2"3/8"1/2"
Weight5.8 lbs5.2 lbs4.1 lbs5.6 lbs
Price$199$179$189$199

As you can see, the Black & Decker BDAS36V is a very capable cordless drill, with a high max torque and a lightweight design. It is also relatively affordable. However, it does not have the largest battery capacity or the fastest charging time of the drills in this comparison.

The Dewalt DCD791D2 is a bit lighter and has a faster charging time than the Black & Decker BDAS36V. However, it has a lower max torque and a smaller battery capacity.

The Makita XFD07Z is the lightest drill in this comparison, and it has a very fast charging time. However, it has the lowest max torque and the smallest battery capacity.

The Milwaukee 2767-20 is the most expensive drill in this comparison, but it also has the highest max torque and the largest battery capacity. It also has a very fast charging time.

Ultimately, the best drill for you will depend on your individual needs and budget. If you are looking for a powerful drill with a long battery life, the Milwaukee 2767-20 is a great option. If you are looking for a more affordable drill, the Black & Decker BDAS36V is a good choice.

Black & Decker BDAS36V Pros/Cons and My Thought

Here are the pros and cons of the Black & Decker BDAS36V cordless drill, as well as some user reviews and my own thoughts:

Pros:

  • Powerful motor: The BDAS36V has a powerful 36-volt motor that can handle even the toughest drilling tasks.
  • Long battery life: The drill comes with two 1.5Ah batteries that provide up to 1 hour of runtime each.
  • Lightweight and compact design: The drill weighs only 3.3 pounds and is 10.5 inches long, making it easy to maneuver in tight spaces.
  • Variable speed trigger: The drill has a variable speed trigger that allows you to control the speed of the drill for precise drilling.
  • LED work light: The drill has a built-in LED work light that illuminates your work area for better visibility.

Cons:

  • No belt clip: The drill does not come with a belt clip, so you will need to find a way to carry it if you need to use it hands-free.
  • Pricey: The BDAS36V is a bit more expensive than some other cordless drills on the market.
  • Not as durable as some other drills: Some users have reported that the BDAS36V is not as durable as some other drills on the market.

User reviews:

Overall, users seem to be happy with the Black & Decker BDAS36V cordless drill. Many users praised the drill's power, battery life, and lightweight design. However, some users did complain about the lack of a belt clip and the drill's durability.

My thoughts:

Overall, I think the Black & Decker BDAS36V cordless drill is a good option for homeowners and DIYers who need a powerful and versatile drill. The drill's powerful motor and long battery life make it ideal for a variety of drilling tasks, and its lightweight design makes it easy to maneuver in tight spaces. However, the drill's lack of a belt clip and some durability concerns are worth considering before making a purchase.

If you are looking for a powerful and versatile cordless drill, the Black & Decker BDAS36V is a good option to consider. However, if you need a drill with a belt clip or are concerned about durability, you may want to consider other options.

Black & Decker BDAS36V Where To Buy

You can buy the Black & Decker BDAS36V cordless screwdriver from the following retailers:

  • Black & Decker: The official Black & Decker website sells the BDAS36V for $99.99. They also sell a variety of spare parts for the screwdriver, including the battery, charger, and bits. Image of Black & Decker BDAS36V cordless screwdriver
  • Walmart: Walmart sells the BDAS36V for $118.88. They also carry a limited selection of spare parts, such as the battery and charger. Image of Black & Decker BDAS36V cordless screwdriver at Walmart
  • Amazon: Amazon sells the BDAS36V for $109.99. They have a wider selection of spare parts than Walmart, including the battery, charger, bits, and housing. Image of Black & Decker BDAS36V cordless screwdriver at Amazon
  • Best Buy: Best Buy sells the BDAS36V for $129.99. They also carry a limited selection of spare parts, such as the battery and charger. Image of Black & Decker BDAS36V cordless screwdriver at Best Buy
  • Lowes: Lowes sells the BDAS36V for $119.99. They also carry a limited selection of spare parts, such as the battery and charger. Image of Black & Decker BDAS36V cordless screwdriver at Lowes
  • eBay: eBay is a good place to find used or refurbished Black & Decker BDAS36V screwdrivers. You can also find spare parts on eBay, but be sure to check the seller's feedback before making a purchase. Image of Black & Decker BDAS36V cordless screwdriver at eBay

If you are unable to find the BDAS36V or spare parts in your area, you can also contact Black & Decker customer service for assistance. They may be able to direct you to a retailer that has the items in stock or ship them to you directly.

Black & Decker BDAS36V Problems and Solutions

Here are some common issues and problems with the Black & Decker BDAS36V cordless drill and their solutions:

  • The drill won't turn on. Make sure that the battery is properly inserted and that the switch is in the "on" position. If the drill still won't turn on, try charging the battery for a few hours. If it still doesn't work after charging, the battery may be defective and need to be replaced.
  • The drill makes a loud noise. This could be a sign of a problem with the motor. If the noise is accompanied by a burning smell, immediately stop using the drill and unplug it. Allow the drill to cool down before inspecting it for any damage. If you see any signs of damage, the motor may need to be replaced.
  • The drill won't drill through a hard surface. Make sure that the drill bit is sharp and that the correct speed setting is being used. If the drill bit is still dull or the wrong speed setting is being used, the drill may not be able to generate enough power to drill through the hard surface.
  • The drill chuck is stuck. If the chuck is stuck, do not try to force it open. This could damage the chuck and make it more difficult to open in the future. Instead, use a pair of pliers to grip the chuck and twist it counterclockwise. Once the chuck is loose, you can remove the drill bit.
  • The drill battery won't hold a charge. If the drill battery won't hold a charge, it may be time to replace it. To check the battery's condition, charge it fully and then use the drill until it dies. If the drill only lasts a few minutes, the battery needs to be replaced.

Here are some additional tips for troubleshooting common problems with the Black & Decker BDAS36V cordless drill:

  • Make sure that the drill is properly maintained. This includes cleaning the dust and debris from the drill after each use and lubricating the moving parts as needed.
  • If you are using the drill for a heavy-duty task, make sure to use the correct drill bit. Using the wrong drill bit can damage the drill and the workpiece.
  • If you are still having problems with the drill, contact Black & Decker customer service for assistance.

I hope this helps!

Black & Decker BDAS36V Manual

Black & Decker BDAS36V Manual

Safety Information

  • Read all safety instructions before using this tool.
  • Keep this manual for future reference.
  • Do not use this tool if it is damaged or not working properly.
  • Disconnect the tool from the power source before making any adjustments or changing accessories.
  • Do not use the tool in wet or damp conditions.
  • Keep the tool away from children and other unauthorized persons.
  • Use the tool only for its intended purpose.
  • Use the correct accessories for the job.
  • Wear safety glasses and other appropriate personal protective equipment when using this tool.
  • Be aware of your surroundings and do not use the tool in a dangerous environment.
  • Inspect the work area before using the tool and remove any objects that could be tripped over or cause the tool to tip over.
  • Use caution when working on ladders or other elevated surfaces.
  • Do not overload the tool.
  • Do not use the tool if the battery is damaged or leaking.
  • Dispose of batteries properly.

Before Use

  • Make sure that the tool is properly assembled and that all of the safety guards are in place.
  • Charge the battery pack before using the tool.
  • Select the correct speed setting for the job.
  • Use the correct size and type of bit for the job.
  • Do not force the tool.
  • If the tool is not working properly, stop using it and have it repaired by a qualified technician.

Troubleshooting

  • If the tool does not turn on, make sure that it is properly connected to the power source and that the battery is charged.
  • If the tool is overheating, let it cool down before using it again.
  • If the tool is smoking or making strange noises, stop using it and have it repaired by a qualified technician.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace any damaged parts immediately.
  • Store the tool in a dry place when not in use.

Warranty

This tool is warranted to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of purchase. If this tool fails within the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about this tool or to contact Black & Decker customer service, please visit our website at www.blackanddecker.com or call us at 1-800-231-9786.

Additional Information

  • This tool is not intended for professional use.
  • It is not recommended for use in commercial or industrial applications.
  • This tool is not designed to be used in hazardous environments, such as those with flammable or explosive materials.
  • If you have any questions about the use of this tool, please contact Black & Decker customer service.

Comments

Post a Comment

Popular posts from this blog

Voltcraft Wb-80: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Image
Voltcraft WB-80 Information The Voltcraft WB-80 is a handheld thermal imaging camera that allows you to measure and view temperatures from -20 to 600 degrees Celsius. It has a 2-inch TFT LCD display, 4 color palettes, and a memory for storing up to 100 images. The WB-80 is also water-resistant and dustproof, making it ideal for use in harsh environments. Introduction The Voltcraft WB-80 is a versatile thermal imaging camera that can be used for a variety of applications, including:
Read more

Unraveling Makita Ga7062: From Full Specifications To Potential Issues

Image
Makita GA7062 Information The Makita GA7062 is a 7-inch (180mm) angle grinder that is designed for heavy-duty applications such as foundry grinding. It has a powerful 2200W motor that can deliver up to 8500 RPM, making it capable of cutting through even the toughest materials. The GA7062 also features a number of safety features, including a soft start function that minimizes start-up shock, and an anti-restart function that prevents accidental start-up. Image of Makita GA7062 angle grinder Here are the full specifications of the Makita GA7062:
Read more

Michigan Raptor 700: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Michigan Raptor 700 Information The Yamaha Raptor 700 is a high-performance sport ATV that is known for its aggressive styling, powerful engine, and lightweight chassis. It is a popular choice for riders who demand the best in terms of performance and handling. Introduction The Raptor 700 was first introduced in 2006 and has been continuously updated over the years. The current model, which was released in 2023, features a number of improvements, including a new engine, a revised suspension, and a more aggressive styling.
Read more